Onsite Stimulation Inventory

Common

---

Inventory Steps

---

Proppant Setup

---

Sieve Test

---

Unit Configuration

---

Bin Configuration

---

Box Configuration

---

Boxes Incoming

---

Proppant Incoming

---

Proppant Straps

---

Proppant History

---

Totals by Job

Summary parameters below are related to selected proppant.

• Received Before Job - the sum of all incoming tickets and/or box runs before the job start date/time, when there are several steps with the same job number - all tickets and runs between the steps and all tickets and runs before the first step of this job numbers are used.

• Used Before Job - the sum of all straps used values within the same intervals / logic as above.

• Strap At Job Start - amount of proppant available at job start calculated as received proppant minus used before proppant.

• Received During Job - sum of all incoming tickets or box runs with the date time between start and end of job (sum of all the stages for related job).

• Job Used (Strap) - sum of Proppant Used (from Straps) strap values during the job (sum of all the stages for related job).

• Strap At Job End - amount of proppant left after the job is finished; calculated as strap at start plus received during job minus used during job.

• Boxes On Site At Job Start - total of all of the boxes that have box runs that have NOT been strapped to zero (i.e. have non-zero proppant in them at this moment)!

• Boxes Incoming During Job - number of boxes that were run during the job (between start/end date/time)(sum of all the stages for related job).

• Incoming Tickets Count - this is the number of incoming tickets (boxes or units/bins) that were added during the job (between start/end date/time)(sum of all the stages for related job).

• Lost To Ground/Hopper - sum of Ground/Hopper straps for Job

• Lost To Ground/Hopper Before Job - sum of Ground/Hopper straps before the last job stage excluding stages with the job number

• Boxes Loaded Count - count of straps for the job (all stages with the same job number) having box container

• Job Used (Model) = you don’t have to have this column in Onsite yet… we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation results
• Job Used (Schedule) = you don’t have to have this column in Onsite yet… we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation treatment schedule
• Job Used (Original Design) = you don’t have to have this column in Onsite yet … we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation stimulation treatment schedule LINKED ORIGINAL DESIGN STS!