Onsite Stimulation Inventory

Common

Common

• Proppant Inventory Project Tag -
• eFIELDPRO version at last upload/download -
• FIELDPRO Onsite current version -
• FIELDPRO Onsite version at last save -

Inventory Steps

• Inventory Step -
• Job Number -
• Job Start Date/Time (Handover to Frac) -
• Job End Date/Time (Handover to Wireline) -
• Inventory Step Date/Time -
• Job Model Zero Date/Time -

Proppants

Proppant Setup

• Proppant Identifier -
• Proppant Description -
• Bulk Density, lbm/ft3 -
• Color -
• Sieve Size 1 -
• Sieve Size 2 -
• Sieve Size 3 -
• Sieve Size 4 -
• Sieve Size 5 -
• Sieve Size 6 -
• API -

Sieve Test

• Proppant Identifier -
• Name -
• Size 1 -
• Size 2 -
• Size 3 -
• Size 4 -
• Size 5 -
• Size 6 -
• Pan -
• Total -
• % between -
• Value between -
• Comments -
• Date Time -
• Incoming Ticket -

Unit Configuration

• Unit Code -
• Unit Label -
• Unit Position -
• Number of Bins -
• Total Unit Capacity, ft3 -

Bin Configuration

• Unit Code -
• Unit Label -
• Unit Position -
• Bin Label -
• Capacity, ft3 -
• Bin Code -

Box Configuration

• Box Code -
• Box Capacity, ft3 -
• Weight In Box, lbs -
• Proppant -

Boxes Incoming

• Ticket Number (BOL) -
• Box Run Date/Time -
• Box Run Weight, lbs -
• Box Run Proppant -
• Supplier -
• Box Code -
• Box Capacity, ft3 -
• Box Mass Capacity, lbs -
• Box Run Count -
• Box Load Order on Unit -
• Comments -
• Inventory Step -
• Job Number -
• Unit -
• Job Time, min -

Totals by Job

Summary parameters below are related to selected proppant.

• Received Before Job - the sum of all incoming tickets and/or box runs before the job start date/time, when there are several steps with the same job number - all tickets and runs between the steps and all tickets and runs before the first step of this job numbers are used.

• Used Before Job - the sum of all straps used values within the same intervals / logic as above (using parent logic / not date).

• Strap At Job Start - amount of proppant available at job start calculated as received proppant minus used before proppant.

• Received During Job - sum of all incoming tickets or box runs with the date time between start and end of job (sum of all the stages for related job).

• Job Used (Strap) - sum of Proppant Used (from Straps) strap values during the job (sum of all the stages for related job).

• Inventory Step Used (Strap) - sum of Proppant Used (from Straps) - for the selected inventory step (not the full job)

• Strap At Job End - amount of proppant left after the job is finished; calculated as strap at start plus received during job minus used during job.

• Boxes On Site At Job Start - total of all of the boxes that have box runs that have NOT been strapped to zero (i.e. have non-zero proppant in them at this moment)!

• Boxes Incoming During Job - number of boxes that were run during the job (between start/end date/time) (sum of all the stages for related job).

• Incoming Tickets Count - this is the number of incoming tickets (boxes or units/bins) that were added during the job (between start/end date/time)(sum of all the stages for related job).

• Lost To Ground/Hopper - sum of Ground/Hopper straps for Job

• Lost To Ground/Hopper Before Job - sum of Ground/Hopper straps before the last job stage excluding stages with the job number

• Boxes Loaded Count - count of straps for the job (all stages with the same job number) having box container

• Available To Be Loaded - sum of Weight In Box values for all the boxes for all the steps related to specified job where selected proppant equal to current proppant.

• Total Capacity Volume - sum of all capacities of all the boxes and bins

• Total Capacity Weight - Total Capacity Volume multiplied by current proppant density.

Available in context of loaded inp file only (future development):

• Job Used (Model) = you don’t have to have this column in Onsite yet… we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation results
• Job Used (Schedule) = you don’t have to have this column in Onsite yet… we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation treatment schedule
• Job Used (Original Design) = you don’t have to have this column in Onsite yet … we will figure out a way to read this from the input file and display it… in PHX, it should come from the linked stimulation simulation stimulation treatment schedule LINKED ORIGINAL DESIGN STS!

Water

Water Containers

• Container Code - code of container
• Container Label - label of container which is displayed in select boxes
• Container Position - you can choose left or right
• Container Capacity (ft3) - maximum container volume

Water Incoming

• Container Label - allows to select the container by choosing its label
• Container Code - allows to select the container by choosing its code
• Ticket Number - text identifier of the incoming event
• Incoming Volume - amount of water came
• Source - source company references
• Job Number - inventory step job number
• Inventory Order - inventory step

Water History

• Container Label -

• Container Code -

• Volume Transaction -

• Water Incoming Total -

• Water Used Total -

• Water Balance Total -